=========================================================
	          Exabyte SCSI Tape Driver 
              Installation Disk for Window NT 4.00
			  Version 1.00 

	 COPYRIGHT (C) 1997 BY Exabyte Corporation
=========================================================

This Exabyte SCSI Tape Driver( Mammoth2.SYS) supports :
 
-  EXB-8500 series 
-  EXB-8700 series
-  EXB-8900 series
-  Eliant
-  TR-4 
-  Mammoth2

tape drives. This driver fully supports the NT tape API. 

------------------------------------------------------------------------------------------

	                	     INSTALLATION

1.) Boot the machine to Windows NT. 
2.) Run "Tape Devices" in the "Control Panel" folder under the "Settings" start menu.
3.) If the "Tape Devices" application automaticaly attempts to install any drivers cancel 
    their installation.
4.) Select the "drivers" tab in the "Tape Devices" window.
5.) Remove any previously installed Exabyte SCSI-2 tape drivers.
6.) Select "Add".
7.) Select "Have Disk".
8.) Enter the path to the OEMSETUP.INF  files.
9.) When prompted to install the "Exabyte SCSI tape driver"
    tape drives," click OK.
10.) Reboot the system to activate the driver if asked by the application.

------------------------------------------------------------------------------------------

	 IF THERE ARE PROBLEMS WITH THIS DISK

Every effort was made to ensure the accuracy of this disk.  
Should you encounter a problem, please contact us at the 
following address:

    Exabyte Corporation
    1683 38th Street	
    Boulder, CO  80301

No telephone calls, please.

REMEMBER:  Make a backup copy of this disk and put the 
original disk in a safe place!
